Aminogro:
*Improves Brix, Specific Gravity & Baume´ levels in plants and fruit
*Improves fruit & flower colour, uniformity and size
*Improves post harvest storage life of vegetables and fruit
*Improves the stress tolerance levels of plants
*Assists the plants natural pest and diseases resistance
*Enhances the uptake and assimilation of trace mineral to rapidly correct minor micronutrient deficiencies
*Improves soil structure, water holding capacity and CEC levels
*Supplies organic nitrogen (glutamic acid) to the plant & soil

Amino Acid Based Plant Biostimulation
The basic management objective for maximizing net photosynthesis (plant food production) and minimizing physiological disorders is to provide the best possible growing conditions for uniform growth throughout the growing season. Uneven growth results from environmental (temperature flucuations, frosts, moisture levels, salt levels, chemical damage) stresses.

Any mechanism or means of assisting plants to maintain more uniform and lasting growth, particularly during periods of intermittent stress, will minimize the chance of yield and quality loss during periods of adverse conditions. Aminogro was designed for this purpose through using L form amino acid based plant biostimulation.

Enzymatic Hydrolysis
Aminogro® contains the L form amino acids normally produced by plants. It is manufactured using a process called enzymatic hydrolysis. The process extracts amino acids from carefully selected marine waste material, utilising specific enzymes to break the peptide bond of protein. Unlike other types of hydrolysis, (acid and alkaline) enzymatic hydrolysis extracts free L form amino acids which are biologically active (100% plant available).

Role of L form Amino Acids in Plant Function
Amino acids, the building blocks of all protein matter, are natural molecules that take part in all of a plant's physiological processes. The action of amino acids provide the natural self-protective plant functions that control photosynthetic activity (plant food production) and water and nutrient use efficiency of plants.

Plants normally produce their own L form amino acids by performing a synthesis (joining together of plant compounds) of the required amino acid or by hydrolysis of a particular protein (the taking apart of plant proteins) that contains the amino acid. The amino acids are also transported throughout a plant so that they are available when and where they are needed.

These activities employed by a plant to produce their own L form amino acids require extraordinary use of energy by a plant.

The exogenous or foliar application of L-amino acids greatly reduces the energy used by a plant for their production and translocation. The energy saved can be used by a plant for other vital processes resulting in more uniform and lasting growth, particularly during periods of intermittent stress.

The net result is a healthy and efficient plant that is more able to withstand the various stresses caused by adverse conditions, as well as pest and diseases attack.

Plant Stress Management and Nutrition
Adding Aminogro® to your normal plant nutrition program is an economical and ecologically sound approach to plant stress management and well balance plant nutrition for better cropping rates and quality.

Generally stress conditions cause several common
reactions in plants:
*Photosynthesis stops (plant energy production stops)
*Respiration increases (plant energy use increases)
*Stomata closure (vital gas exchange is reduced)
*Initiation of premature foliar senescence (leaves begin to die)
*Variation of internal water potential and osmotic pressure (reduces plant nutrient uptake and movement throughout a plant)
*Increase of Abscisic acid (ABA) which causes the fall of flowers, leaves and fruit.

The action of the L form amino acids in Aminogro combat these reactions by:
*Increasing water potential
*Regulating osmotic pressure
*Slowing down the photorespiration process
*Increasing net photosynthesis
*Preventing stomatal closure

Chelating Properties of Aminogro®
The chelate formed by L form amino acids and a metallic ion retains the properties of the two compounds of the chelate and maintains its biological activity at the cellular level.

The chelate has the following features:
*It is not phytotoxic (will not burn a plant)
*It facilitates the absorption of nutrients by increasing the permeability of the cellular membrane
*It maintains iron and calcium solubility, thus strengthening the action and absorption of iron and calcium chelates

The effectiveness of the L form amino acid chelates in Aminogro is particularly high at the foliar level and can remedy minor deficiencies in a plant that often have no visible symptoms.

Pollination and fruit-setting
Crop yields are a direct function of a successful pollination and fruit set. It is very important that the pollination and fertilization processes must occur under optimum conditions.

The application of Aminogro contributes to a successful pollination and fruit set:

=> The amino acid is a nutritive attraction for pollinating insects. It is mostly important for the insect pollination species.
=> The nutritive substances located in the pollen grain are sometimes not enough to nourish it during all its cycle. The application of extra nutritive sources are necessary in order to complete its development. Amino acids are one of the vital nutritive sources of the pollinic tube development.

The addition of proline (amino acid) and glutamic acid (amino acid) increases the germination quality of the pollen grain and makes a longer pollinic tube. This significantly increases the fertilization of ovules in the ovary and hence successful and complete fruit set.

Aminogro® - pest and diseases resistance.
Aminogro improves the health of plants which asistts with natural insect and disease defence

Analysis (W/V)

Nitrogen (N) as protein.........................................2.4%
Phosphorus (P) as protein.....................................0.5%
Potassium (K) as protein.......................................0.5%
Calcium (Ca) as protein........................................0.5%
Boron (B) as Boric Acid.......................................0.08%
Molybdenum (Mo) as Sodium Molybdate........0.006%
Zinc (Zn) as Sulphate..........................................0.05%
Magnesium (Mg) as protein................................0.05%
Magnesium (Mg) as Sulphate.............................0.03%
Iron (Fe) as protein............................................0.006%
Copper (Cu) as protein......................................0.005%
Manganese (Mn) as protein..............................0.006%
Sulphur (S) as Sulphates and protein.................0.9%
TOTAL SOLIDS......................................30.65% W/V

Directions for use

FOLIAR APPLICATIONS
Due to the nature of amino acids and micronutrients Aminogro® is best applied to the foliage of plants.To achieve best results with Aminogro® always apply with Synertrol®Horti Oil and spray both top and underside of foliage. Synertrol®Horti Oil @ 2.5ml/L of water will increase spray coverage, rainfastness and reduce drift and spray odour.

Vegetable crops and Tomatoes:
Rate: 10ml/L every 10-14 days

Berry crops:
Rate: 10ml/L every 10-14 days during cropping phase

Wine Grape Vines:
Rate: 5L/ha every 10-14 days from bud swell up to pea size berries stage. Further sprays may be required after veraison if hot weather (over 300C average daily temperature) persist into grape maturity. Two post harvest sprays are also advised to improve carbohydrate reserves for next seasons crop.

Tree Crops (nuts, pome fruit, stone fruit, mangoes and exotic tree crops):
Rate: 10L/ha every 20-30 days.

Nursery, Seedling, Cutflowers, Herbs,
Bananas,Sugarcane
Rate: 5ml/L every 10-14 days. Seedlings should be sprayed approx. 5 days before emergence. After emergence apply twice weekly for 2 weeks then every 10-14 days. Treat sugarcane sets with a 20ml/L solution in the dip
Turf: Rate: 5ml/m2 every month.

Citrus, Ferns, orchids, carnations and other known sensitive species.
Rate: 4ml/L every 10-14 days

SOIL APPLICATIONS
Application of Aminogro® should be applied or injected into the irrigation system towards the end of watering. It is necessary to apply enough water to carry Aminogro® into the top 20cm of the soil profile

Annual Crops
Apply to soil before planting @ 40L/ha with Synertrol® Horti Oil @ 1L/ha. Good results are to be achieved also if Aminogro® is sprayed with pre-emergent or other non-selective herbicides prior to ground preparation. Aminogro® will assist in speeding up the breakdown of trash and weed residue.

Perennial Crops
Apply at 40L/ha just prior to budswell, fruit set, and vegetative flushing.

COMPATIBILITY
Aminogro® can be mixed with most commonly used horticultural and garden sprays. However, the performance of some products may be affected by the suspended solids in this product so that they become either non-effective or phytotoxic to the crop being sprayed. Always check the pesticide spray labels for compatibility with foliar fertilisers or to be safe, test the mixture on a small area, before widespread application.